GB/T 36266-2018 Translated English of Chinese Standard. (GBT 36266-2018, GB/T36266-2018, GBT36266-2018): Glass for Shower EnclosuresThis Standard specifies the classification, materials, requirements, test methods, inspection rules, and marking, packaging, transportation and storage of glass for shower enclosures. This Standard is applicable to glass for interior shower enclosures and panels. |
Contents
Foreword | 5 |
Test Methods | 8 |
Inspection Rules | 13 |
Packaging Marking Transportation and Storage | 16 |
Reference | 17 |
Common terms and phrases
0.5 mm Maximum adopted in laminated allowable deviation allowed to exist appearance quality arc length batch of products Chemicals and Dirt comply with requirements comply with stipulations cotton to wipe curved glass defect is allowed deionized water determined as qualified deviation and flatness diagonal difference dimensional deviation Dry-wet Cycle exist per square exit-factory inspection Falling-ball Impact feeler gauge film mounted layer film mounted tempered Functional Film Glass Defect Description glass shall comply Impact and Stripping impact body inspection of appearance laminated glass linear defect Mass Fraction Maximum 1 defect measure model inspection mounted tempered glass PCS comply PCS of sample piece of glass place the sample position of hole processing technology Reagents requirements in GB Resistance to Chemicals sample is flat Shot-bag Impact Performance shower enclosures Side Length sink stack deviation steel ruler stipulations in Table straight edge Stripping Performance thickness deviation unqualified vinyl acetate waveform curvature Width wipe it clean