GB 11567-2017 Translated English of Chinese Standard. GB11567-2017: Motor vehicles and trailers - lateral and rear underrun protection requirementshttps://www.chinesestandard.net, 13 mars 2018 - 33 pages This Standard specifies the technical requirements for lateral and rear underrun protection devices of motor vehicles and trailers as well as the technical requirements for vehicles. This Standard is applicable to N2, N3, O3 and O4 vehicles. This Standard is not applicable to semi-trailer tractor or the vehicles that are designed and manufactured particularly, lateral and rear underrun protection devices cannot be mounted due to objected reasons. The requirements for rear underrun protection are not applicable to special purpose vehicles specially designed and manufactured to handle long staples that cannot be segmented. |
Expressions et termes fréquents
100 mm inwardly 100 mm rearward air suspension axis calibration channel amplitude level chassis connector continuous vertical component coordinate axis crossbar data channel data path different mounting positions Edition exceed fixed barrier frequency frequency response front edge gas cylinder GB/T inwardly curved lateral protection device loading point loading test longitudinal center plane longitudinal plane maximum horizontal deformation measurement meet the requirements minimum radius N2 and N3 N3 and O4 no-load condition O4 vehicles outermost end Perform the test points of action quarter arc rear axle rear underrun protection rear-end collision requirements for lateral requirements for vehicle requirements of Clause road transport liquid sampling frequency semi-trailer sensor specified in Annex structure tailgate tank vehicle Technical requirements test according test conditions test load three-point loading transport liquid dangerous transverse component two-point loading underrun protection device upper edge vehicle component vehicle for road vehicle type vehicles and trailers vehicles equipped width